Home How To How To Start Your Mac In Safe Mode 2022 | Complete Guide

How To Start Your Mac In Safe Mode 2022 | Complete Guide

by Pat Ericson
How To Start Your Mac In Safe Mode

Looking for a tutorial on how to start Mac in safe mode? Well, you’re at the right place. Check out how to start your Mac on safe mode, what it does, what it doesn’t, and a lot more. Read further to know more about it. 

If you’re having trouble starting up your mac, or it’s not working the way it should, you may be able to fix the issue by starting it in safe mode. Safe mode is a diagnostic state that starts up your computer with a minimal set of system files and drivers. 

This can help you determine if there’s a problem with one of your applications or if there’s another issue causing your computer to malfunction. Safe mode will not hamper your device or delete data but will rather save caches again for when they’re needed.

I have tried using safe mode several times when my Mac is suffering from a temporary issue that couldn’t be resolved in a bit and it was urgent for me to use the device. Initially, I was worried about my data because I had a lot of important documents on my Mac.

How To Start Your Mac In Safe Mode?

Safe mode is a mode of your Mac that starts it with a minimal set of files and drivers. This can help you troubleshoot issues on your Mac. To start your Mac in safe mode: shut down your Mac and press the power button to turn on your Mac. Keep pressing the Shift key until the Apple logo appears. If you’re having trouble starting up your Mac in safe mode, or if you have another question about safe mode, check out Apple’s support article about Starting up in safe mode.

I was surprised that all my data was in place and everything was back to normal once I was using general mode. If you’re facing issues with your Mac like screen freezing, crashes, and technical glitches then you should definitely try the safe mode on your system too. 

So, without any further ado, let’s get on to elaborate on how to start your Mac in safe mode, what it does, how would you know you’re in safe mode and a lot more. 

Recommended Read: How to Setup Old iMac as External Display Monitor

How To Start Your Mac In Safe Mode

What is Safe Mode on Mac?

Safe Mode is a diagnostic mode that starts your Mac in a limited state. It uses a minimally configured version of the macOS operating system and helps you troubleshoot problems.

How To Start Your Mac In Safe Mode

Safe Mode loads a minimum amount of software, which can help you determine if an issue is caused by a software problem or by something else.

For example, if you’re experiencing problems with an application, you can start your computer in Safe Mode and then uninstall the application to see if the problem goes away.

Why Use Mac on Safe Mode?

Many experts believe that putting your Mac on safe mode can actually help which is why this is the first step to be adopted when your system is facing any sort of problem. This is because when your system is on safe mode, the caches are cleared and the files and useful documents have almost no chance of being corrupt. Many tech geeks have adopted the safe mode as a myth that should be tried before any other solution. 

Here are some reasons why you’d like to use your Mac on safe mode:

  • Safe mode can help to rule out software-related issues
  • Safe mode also temporarily disables any third-party software (such as fonts and input methods) that may be causing problems
  • Mac is stalled during power on 
  • Mac is running on a very slow speed
  • And if you’re trying to install macOS updates or upgrading from one version of macOS to another, you’ll need to start up in safe mode first

There are a few apps that get sticky and are hard to remove in normal mode because the system service wouldn’t remove them. Hence in safe mode, these sticky apps can be easily removed because the unimportant services aren’t loaded. 

How to Start My Mac in Safe Mode

Here’s how to restart your Mac in Safe Mode, follow the steps below:

  • Start your Mac by pressing the power button 
  • Immediately after hearing the start-up chime, hold down the Shift key until you see the grey Apple logo and progress bar 
How To Start Your Mac In Safe Mode
  • After your Mac finishes starting up, you should see “Safe Boot” in red letters at the login window 
  • Log in as usual — you may notice that some apps take longer to open or behave differently while in Safe Mode 

 Depending on the reason why you’re restarting your Mac in Safe Mode, you may want to

How to Know You’re in Safe Mode 

How To Start Your Mac In Safe Mode

If you’re unsure whether or not you’re in Safe Mode, there are a few ways to check. First, look for the words “Safe Mode” in the top corners of your screen. If you see them, that’s a pretty good indication that you’re in Safe Mode.

Another way to tell is by looking at the apps and programs that are available to you. In Safe Mode, only the essential apps and programs are accessible, so if you see a limited selection of apps, that’s another clue that you’re in Safe Mode.

How To Start Your Mac In Safe Mode

Finally, try restarting your device. If it boots up into Safe Mode automatically, that means Safe Mode is enabled.

What Works in Safe Mode on Mac?

Safe mode is a diagnostic mode that starts your Mac in a limited state. It uses a minimal set of kernel extensions and startup items, and it disables user-installed fonts, extension components, and third-party system software.

Safe mode can be useful for troubleshooting problems with your Mac. For example, if you can’t start up your Mac or if it starts up but then crashes, you can use safe mode to help identify the problem.

In safe mode, you can only use the applications that come with macOS or that were installed in the Applications folder before you started up in safe mode. You’ll also not be able to load fonts that you’ve manually installed. 

You can’t log in to accounts other than the built-in Guest account, and networking is disabled. Your Mac will pretty much resemble a brand new system that’s just been brought. 

What doesn’t Work in Safe Mode on Mac?

While Safe Mode is a great way to troubleshoot your Mac, there are actually quite a few things you can’t do while in Safe Mode. Here are some things that you won’t be able to do when you’re on safe mode:

  • You can’t access the internet in Safe Mode, so if you’re looking to troubleshoot a Networking issue, you’re out of luck. Wifi network system won’t be available.
  • Additionally, certain apps and features will be inaccessible in Safe Mode – this includes all forms of file sharing (iCloud Drive, AirDrop, etc.), Time Machine backups, and more.
  • You won’t be able to print anything out while in Safe Mode. 
  • You also won’t be able to capture videos on video apps when you’re on safe mode. 
  • Audio devices will not function on safe mode.
  • You’ll also not find all the graphics to be normal. For example, the dock might appear grey rather than transparent. Some app logos might differ from usual etc. 

How to Exit Safe Mode on Mac?

To exit safe mode on a Mac, you’ll need to restart the computer. Here are the steps that you’d be required to follow:

How To Start Your Mac In Safe Mode
  • Shut down your Mac.
  • Press and hold the power button until the Mac turns on and displays the startup screen.
  • Release the power button and press it again, then hold it down for about six seconds until the computer restarts.
  • Once your Mac has restarted, release the power button 
  • Log in to your account as usual.
  • The Safe Mode message should no longer be displayed in the upper-left corner of your screen.

.Takeaway

Safe mode is the best way to operate your Mac while it’s facing issues. Hope our guide on how to start your Mac in safe mode was insightful and helped you in the process.

Do let us know if you have any questions in the comments below!

Also Read:

You may also like

You cannot copy content of this page